[unhelpful rubbish from Dan (Dirtyrider) deleted]

C'mon Dan, keep that kind of stuff for the Soapbox. Or, preferably, somewhere else entirely ;-)

Pale keep it, do some upgrades, as suggested a Lay Back post, maybe longer stem to ??

Also get the BETD linkage, to increase the BB height.

What else is wrong with it ??

PTC the New Enduro's despite there freeridey ness have very long top tubes ( to long for me )


Also, the Seat is all the way back isn't it Pale ?? Just incase ??

I've got a 31.9 Dia Layback post somewhere, 1inch of layback if thats any use to you ?? ( likely not enough, depending on you current post )

thomson layback

yawn

;o)

the 2002 already has a layback seatpost and the saddle is right at the back already - I have changed the bars for Easton 2" risers and don't want a longer stem. seems like my only option, if I am going to keep the bike is pushing the shock ? Its either that or strip it and change the frame !

All your help is very much appreciated guys !

Pushing it isn't going to help with your top tube length, it's sell the Frame and buy a bigger one time and swap the bits over.

If a 1" layback seat stem's not enough & you don't want to swap the front stem then a px frame it must be. Seat tube on an Enduro is 30.9mm btw. Shame, the Enduro's a good bike once sorted

actually I think my spare post, is 30.9, it's definately a .9 and smaller than the Trek's 31.6.

But you've already got 1 so :(

my soloution to the problem at hand is

post and stem, body-armour, throw yourself down some dh-runs

oh, post is a no-can-do, but look at this

i know it's an american website, but you should be able to source it in england

here's a better link!

TPR, any progress in getting the geometry sorted?