Home > Forum > Maintenance
Sunday 22 November 2009 | Personalise | Help  
 FORUM
Discussions by:   Latest Posts | New Discussions | Hot Threads | Forum Topics
 Search forum: 
Cog #9 deore xt
Rear mech
1 to 7 of 7 messagesTo post a reply you need to be a member - Join now.
Show/hide user stats
Redhog
11/10/09 10:13

I can't get my chain to settle properly in the highest gear when on the big ring - the adjustment screw is out as far as it can go yet it keeps trying to hop back on the 8 cog.

Teh mech does not seem to be damaged or bent in anyway, the bike has just been serviced as it is only 3 months old.

Suggestions anyone?

 Send to friend
This member’s stats are private
Nobby
11/10/09 10:51
Take it back to whoever serviced it.  It's possibly just a bit of cable adjustment needed.
 Send to friend
Edited: 11/10/09 10:52
This member’s stats are private
Klunk
11/10/09 11:31
check to see if cog 9 or 8 is bent, they are not particular stiff and are quite easy to bend between the alloy carrier pins.
 Send to friend
Show/hide user stats
Redhog
13/10/09 21:54

If the cogs were damaged would it not cause the same problem on the middle ring?

 Send to friend
Show/hide user stats
Mike Davis
14/10/09 10:11
When you say "highest" do you mean "highest gear ratio" (ie smallest sprocket) or "highest" in the sense of "furthest up the cassette" (ie biggest sprocket)? If it's the smallest sprocket, the cable tension's probably too high - turn the barrel adjuster (on the mech if it's conventional, on the shifter if it's a Shadow) clockwise 1/4 turn at a time until it's happy. If it's the biggest sprocket, the reverse is true, although big ring/big sprocket is a nasty gear to be in anyway.
 Send to friend
Show/hide user stats
Andy James 7
17/10/09 07:17

Check that they have put the rifght spacers in the bottom bracket..

bad reading of the instructions can  sometimes send that off line

 Send to friend
Show/hide user stats
Droppin-Neutron
17/10/09 08:35
I had this (athough with sram not xt) and after replacing the mech, cassette, checking chain line and banging my head against a wall, discovered that the mech hanger was ever so slightly bent inwards towards the wheel - I stuck it in a vice and gently bent it back, worked fine straight away.
 Send to friend
  
 
Change stats view
Make external bookmarkAdd to My Bookmarks
« Previous thread   -   Next thread »
Home > Forum > MaintenanceForum jump  
Support our sponsors
 
Join BikeMagic login to BikeMagic
Forgotten your password? | Why should I join BikeMagic?

Support our sponsors

Shopping Partners
AW Cycles
Cycle Surgery
Wiggle
Kudu Bikes
Chain Reaction Cycles
Sprockets.uk.com
 
United Kingdom
Three Peaks Bike & Hike
Bike tours in France & Italy
Explore Cycles
Endurance Life
 
Offers, Competitions and Promotions
win free stuff with rcuk

Squirt Competition
Win 1 of 50 bottles of SQUIRT - Long lasting Dry Lube
Ticket2RideBC Adventures
Advertorial: Ticket2RideBC specialises in guided mountain bike adventures
British Heart Foundation
Advertorial: Get cycling for the BHF and raise vital money