 |
 Boy DaSilva |
|
| Posted: 31/05/04 05:52:20 20 |
| Everybody gets a say but you do what you wanted to do anyway |
 Debate this in the forum |
|
| Boy DaSilva |
|
| Posted: 13/05/04 18:58:02 02 |
| Now all they need to do is figure out a way to stop the rear mech from shearing off at the slightest hint of a heavy landing. |
|
Debate this in the forum |
|
| Boy DaSilva |
|
| Posted: 12/11/03 02:43:53 53 |
| I'd avoid chieftains cos they're way too heavy. The saint cranks look ok and you will have to buy a BB with them, but they're stronger than the Truvativs. Hayes HFX9s are decent enough brakes, as are hope 4pots, that's a personal choice thing (I ride hayes) |
|
Debate this in the forum |
|
| Boy DaSilva |
|
| Posted: 05/11/03 14:20:24 24 |
| Get the Goldtech Draco, 4 pawls in the freehub as opposed to hopes 3, makes for a louder noise |
|
Debate this in the forum |
|
| Boy DaSilva |
|
| Posted: 04/11/03 17:18:30 30 |
| Make sure that the spacers aren't touching the BB cups. There should be a slight gap between the BB cup and the big flat alloy spacer thingy when everything is tightened down. And try to make sure you have the same amount of axle in each of the cranks too. |
|
Debate this in the forum |
|
