 |
 glen smart |
|
| Posted: 28/05/07 23:00:19 19 |
15 LEDs consuming 1 Watt would at a guess produce about 20 Lumens of light.
A 12W overvolted Halogen would produce about 300 Lumens, so about 15 times as bright.
If you want a bright LED light try something like a Dinotte. |
 Debate this in the forum |
|
| glen smart |
|
| Posted: 19/05/07 23:39:44 44 |
| Road cranks are less likely to bend a square taper axle because the horizontal spacing of the pedals is less. Smooth and/or lightweight riders are less likely to bend them. Reducing the chainline from 50mm to 47.5mm or even 45mm by using a shorter axle would also help! |
|
Debate this in the forum |
|
| glen smart |
|
| Posted: 19/05/07 22:58:49 49 |
XT UN73 68mm-110mm 256grams
LX UN53 68mm-110mm 303grams
The bearing cups are inside and are what the ball bearings roll against. |
|
Debate this in the forum |
|
| glen smart |
|
| Posted: 18/05/07 23:38:35 35 |
| Twin front discs would be nice. They're better on motorbikes because you don't get the fork twist that a single front disc gives! |
|
Debate this in the forum |
|
| glen smart |
|
| Posted: 18/05/07 23:29:51 51 |
XT square taper has a hollow axle, and the LX square taper has a solid axle. Cups might be alloy in XT and steel in LX. The LX is a lot heavier!
|
|
Debate this in the forum |
|
